Quick Answer:
This paper cup sizes chart covers nominal US fluid-ounce ratings measured to the brim. The common range runs from 4 oz (about 118 ml) to 24 oz (about 710 ml), but a 12 oz cup serves only about 300–320 ml after lid headroom. Rim diameter, not volume, decides lid fit: 80 mm and 90 mm cover most orders. Choose by served volume, then confirm one mold per size. XINCHEN builds automatic forming machines for 2.5–16 oz cups at 100–130 pcs/min.
This paper cup sizes guide gives buyers the 4–24 oz paper cup sizes chart, ml conversions, a drink rule, and the rim and mold checks behind a buildable order.
What Does the 4–24 oz Paper Cup Sizes Chart Show?
Use this paper cup sizes chart as a shortlist, not a purchase specification. The ounce figure is nominal capacity; rim and height are typical for a single-wall hot cup; cold and double-wall cups can differ in height and taper.
| Nominal size | US fl oz to ml | Typical rim | Typical height | Common use |
|---|---|---|---|---|
| 4 oz | ≈118 ml (often sold as 120 ml) | 62 mm | 60 mm | Espresso, samples |
| 6 oz | ≈177 ml (often sold as 180 ml) | 70 mm | 78 mm | Small coffee or tea |
| 8 oz | ≈237 ml (often sold as 240 ml) | 76 mm | 93 mm | Small or regular coffee |
| 10 oz | ≈296 ml (often sold as 300 ml) | 85 mm | 95 mm | Regular tea or coffee |
| 12 oz | ≈355 ml (often sold as 350–360 ml) | 90 mm | 110 mm | Medium coffee, cold drinks |
| 16 oz | ≈473 ml (often sold as 480–500 ml) | 90 mm | 135 mm | Large coffee, iced tea |
| 20 oz | ≈591 ml (often sold as 600 ml) | 90 mm | 159 mm | Large cold drinks |
| 24 oz | ≈710 ml (often sold as 710–720 ml) | 90 mm | 179 mm | Extra-large cold drinks |

These values are rounded; ask for a drawing with rim, bottom, height and fill volume. XINCHEN’s paper cup machine range lists the current platforms.
oz vs ml: What Do the Numbers Really Mean?
One US fluid ounce is 29.5735 ml: 8 oz is 236.6 ml, 12 oz 354.9 ml, 16 oz 473.2 ml, 24 oz 709.8 ml.
Why Is a 12 oz Cup Labeled 350, 360 or 355 ml?
355 ml is exact; 350 and 360 are rounded labels. The cup drawing, not the label, is the controlled document. If your spec says 350 ml, confirm whether that is brim capacity or fill volume.
Why Does a 16 oz Cup Sometimes Say 500 ml?
473 ml is exact. A 500 ml label usually means the supplier rounded up or means a different cup. Two 16 oz cups can differ in rim and height. The safe paper cup sizes chart entry lists both: “16 oz / 473 ml nominal, 90 mm rim.”
Which Paper Cup Size Fits Which Drink?
A paper cup sizes chart narrows the options; this paper cup sizes guide uses the drink to decide the fill.
Coffee and Tea: Is 8, 12 or 16 oz the Right Size?
For cafés, the shortlist is 8, 12 and 16 oz: small, medium and large takeaway. Many stop at three sizes; each extra size adds a mold, lid and carton. The XC-100 is published at 2.5–12 oz and 100 pcs/min, which covers an 8/12 oz line; a 2.5–16 oz platform covers all three with separate molds.

Cold Drinks and Juice: When Do You Need 20 or 24 oz?
Ice displaces volume, so cold service often moves up one size; a 16 oz cup with ice may deliver only 10–12 oz. So 20 and 24 oz cups are common for fountain drinks and iced tea. They usually use a 90 mm rim, but the taller body and condensation change the board requirement.
Bubble Tea: Does a 16 oz Cup Fit?
Bubble tea needs a tall cup, wide straw and lid or sealing film, and the taper can differ. XC-116 reaches 16 oz (60–480 ml), but XINCHEN does not list a 16 oz milk-tea cup as a supported standard size. Send the drawing, straw diameter and lid requirement for confirmation.
Rim Volume vs Fill Line: Why Isn’t a 12 oz Cup 12 oz?
A paper cup sizes chart shows nominal capacity; the fill line shows what you can sell. The rating is measured to the brim, but a lidded cup cannot be filled that far. Rim volume, or brim capacity, is the volume to the top of the rolled rim; the lid, foam and carrying need space.

How Much Headroom Should You Plan?
Typical practice leaves 10–15 mm below the rim, roughly 10–15% of volume. A 12 oz (355 ml) cup serves about 300–320 ml; a 16 oz (473 ml) cup serves about 400–430 ml. If your recipe is 350 ml, choose 16 oz.
Why Does This Change the Machine Choice?
Once you know fill volume, add headroom and convert it to a nominal size. A 16 oz rating does not cover every 16 oz shape; molds are size- and shape-specific. XINCHEN builds its own molds, and the XC-116 reaches 16 oz.

How Do Cup Sizes Map to XINCHEN’s Mold Ranges?
In this paper cup sizes chart, the machine range is the envelope a platform can be tooled for, not one mold for every size.
| Model | Published cup range | Published output | Paper range | Buyer fit |
|---|---|---|---|---|
| XC-100 | 2.5–12 oz | 100 pcs/min | 150–300 gsm | 8/10/12 oz coffee and tea |
| XC-116 | 2.5–16 oz (60–480 ml) | 100–120 pcs/min | 150–350 gsm | 12/16 oz coffee and bubble tea cups |
| XC-130S | 2.5–12 oz | 120–130 pcs/min | 150–350 gsm | High-volume 8/12 oz production |
| XC-150 | 2.5–16 oz | 120-150 pcs/min | 150–350 gsm | Hot and cold drink cups |
All three accept different mold sets. A new size needs a sidewall blank, bottom punch and curling tool. A height change with the same bottom diameter may need a partial set; a different bottom or taper needs a full set.
Why Is “2.5–16 oz” Not One Mold?
The range is the sum of available mold sets: a 16 oz cup is taller and may use a different blank from a 12 oz cup on the same rim. Ask how many sets an order includes.
What If Your Range Goes to 20 or 24 oz?
XINCHEN’s published range stops at 16 oz. Cups of 20 and 24 oz are common in cold service but sit outside that range. Send the drawing for a tooling review; the shortlist may change.
Where Does Printing Fit in the Line?
Printing sits upstream: the base paper is first laminated and then printed, die-cut into fan blanks, then formed. Cup size changes the blank and print area, so settle the drawing before artwork. XINCHEN builds the forming end, not the press.
Which Lid Fits: 80 mm or 90 mm Rim?
The paper cup sizes chart cannot answer lid fit on its own; the rim drawing does.

Why Doesn’t the Ounce Label Tell You the Lid Size?
An 80 mm lid commonly fits 6 and 8 oz cups; a 90 mm lid commonly fits 10–24 oz. But a 12 oz cup may be 80 or 90 mm, and an 8 oz cup may also be 90 mm.
Which Rim Diameter Should You Standardize?
For a 6–24 oz menu, standardizing on 80, 85 and 90 mm cuts lid inventory to two families: EU 10oz, 12oz, 16oz. It simplifies ordering but does not reduce molds.
What Else Affects Lid Fit?
Rim curl, taper, lid material and straw-hole design all matter. A 90 mm lid that fits a single-wall 12 oz cup may not fit a ripple-wall cup. Test lids on production cups. Rim curling is a quality checkpoint; this guide to cup rim curling explains what to check. XINCHEN forms the cup and rim; lids are sourced separately, so match both drawings.
FAQ
What Is the Most Common Paper Cup Size?
8, 12 and 16 oz. In coffee, 12 oz is medium, 8 oz small and 16 oz large.
Can One Machine Make 4, 8, 12 and 16 oz Cups?
Yes, with a separate mold set for each. A 2.5–16 oz machine such as the XC-116 covers the range, but a paper cup sizes chart cannot confirm mold fit.
How Do I Choose Between 12 and 16 oz?
Use the paper cup sizes chart plus 10–15% headroom; a 350 ml serve needs 16 oz. For a broader method, see how to choose a paper cup machine.
Which Paper Cup Size Should You Choose?
Choose the smallest nominal size that holds your served volume plus 10–15% headroom, then confirm the rim and lid. Use this paper cup sizes chart and guide to shortlist, the ml conversion to check the menu, and the mold table to check the machine.
XINCHEN has built forming machines in Ruian since 2001, with in-house mold design and a 2.5–16 oz range. Send cup drawings, fill volumes, board and gsm, lid rim, target output, power and air. The team can confirm the molds and model fit. Start with the contact page.





